Advice need on Mission M35i - possible fault

Discussion in 'Hi-Fi and General Audio' started by rickjhns, Jan 16, 2008.

  1. rickjhns

    rickjhns

    Joined:
    Jan 16, 2008
    Messages:
    1
    Likes Received:
    0
    I have just bought a pair of Mission M35i speakers. Whilst installing the speakers I looked into their rear bass ports. I noticed that one speaker has some felt/fibre type material to the right side of (and slightly obstructing) the bass port. This material is nearly touching the lower bass driver.
    I would like to know from other owners of M35is if this is a fault. I would probably be able to move the material away from the port and driver, however, I do not want to do anything which might damage the speaker, or invalidate my warranty.

    The other speaker also has some felt material viewable from the bass post. However, in this speaker the felt/fibre is to the left of the port, and is not near the lower bass driver.

    Any advice would be gratefully appreciated. Cheers Rick Johnson
     
    rickjhns, Jan 16, 2008
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Odd CD player fault, any ideas?

  2. Strange preamp fault

  3. For Sale: F.S Mission 734 speakers (mission Giants)

  4. For Sale: Mission 78C SE + Mission M71 + Mission M5DS

Loading...