Reply to thread

Message

I've swapped it now (but there are no technical issues doing it the other way Paul, as long as the tranny provides enough headroom for your boxes)- the Lynwood is running off the first socket of the Olsen. I have Dac/amp/transport fed from the 3 sockets of the tranny. The Lynwood i have is 3KW BTW:MILD: - more than ample for my needs. At some point i will get a seperate tranny for the sources and feed it from an adjacent socket on the Olsen - possibly a 1KW Lynwood or a 500VA Trichord. Then the existing Lynwood will be used to feed existing and future amplification. (The remaining 5 sockets on the Olsen i use for my bits of clutter (going soft as WM would say) - tape decks/tuners and any other future inmates.(Although i am now out of space on my racks ) (Not very interesting, but i realised the other day - i use a hell of a lot of sockets - i have a seperate strip too, direct from the wall, for aerial amplifiers, timers and stuff - nearly 15 plugs )

<blockquote data-quote="cookiemonster" data-source="post: 493202" data-attributes="member: 1012"><p>I've swapped it now (but there are no technical issues doing it the other way Paul, as long as the tranny provides enough headroom for your boxes)- the Lynwood is running off the first socket of the Olsen. I have Dac/amp/transport fed from the 3 sockets of the tranny. The Lynwood i have is 3KW BTW:MILD: - more than ample for my needs. At some point i will get a seperate tranny for the sources and feed it from an adjacent socket on the Olsen - possibly a 1KW Lynwood or a 500VA Trichord. Then the existing Lynwood will be used to feed existing and future amplification. (The remaining 5 sockets on the Olsen i use for my bits of clutter (going soft as WM would say) - tape decks/tuners and any other future inmates.(Although i am now out of space on my racks<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f631.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":eek:" title="Eek!&nbsp; &nbsp; :eek:"&nbsp; data-smilie="9"data-shortname=":eek:" /> ) (Not very interesting, but i realised the other day - i use a hell of a lot of sockets - i have a seperate strip too, direct from the wall, for aerial amplifiers, timers and stuff - nearly 15 plugs<img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f631.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":eek:" title="Eek!&nbsp; &nbsp; :eek:"&nbsp; data-smilie="9"data-shortname=":eek:" /> )</p></blockquote><p></p>

[QUOTE="cookiemonster, post: 493202, member: 1012"] I've swapped it now (but there are no technical issues doing it the other way Paul, as long as the tranny provides enough headroom for your boxes)- the Lynwood is running off the first socket of the Olsen. I have Dac/amp/transport fed from the 3 sockets of the tranny. The Lynwood i have is 3KW BTW:MILD: - more than ample for my needs. At some point i will get a seperate tranny for the sources and feed it from an adjacent socket on the Olsen - possibly a 1KW Lynwood or a 500VA Trichord. Then the existing Lynwood will be used to feed existing and future amplification. (The remaining 5 sockets on the Olsen i use for my bits of clutter (going soft as WM would say) - tape decks/tuners and any other future inmates.(Although i am now out of space on my racks:eek: ) (Not very interesting, but i realised the other day - i use a hell of a lot of sockets - i have a seperate strip too, direct from the wall, for aerial amplifiers, timers and stuff - nearly 15 plugs:eek: ) [/QUOTE]

Verification