Nippn Chemi-Com

Discussion in 'DIY Discussion' started by granville, Feb 20, 2006.

  1. granville

    granville

    Joined:
    Feb 11, 2006
    Messages:
    138
    Likes Received:
    0
    Location:
    The edge of reality
    Does any one know of a source for Nippon Chemi-Com electrolytics,

    I am after the Black 10000uF (M) 63v also has SMH 85C
    code on side = 2X07041M ?

    I have substituted them with Nippon Chemi-Chem 10000uF (M)
    63v KMH 105C code = ODAO4L These are brown and larger

    but are not as good. Any ideas ?

    regards granville
     
    granville, Feb 20, 2006
    #1
  2. granville

    Graham C

    Joined:
    Jun 20, 2003
    Messages:
    680
    Likes Received:
    0
    Location:
    Leicestershire
    what about them is not as good?
     
    Graham C, Feb 21, 2006
    #2
  3. granville

    granville

    Joined:
    Feb 11, 2006
    Messages:
    138
    Likes Received:
    0
    Location:
    The edge of reality
    Graham, They form the power supply of a four channel PWM
    amp (LC Audio) There is a little more hiss from the drive units(with no signal) when compared with the original ones. The treble is also not quite as pure as it was. A little bit cloudy ! I don't know the difference between them apart form temp rating.
    Any help or thought would be appreciated.
     
    granville, Feb 21, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.